animation


CONTACT BURNISHERS

building


logo

menu

Clean Contacts Without Chemicals

"Non-Residual" contact burnishers leave no filings, grit, dust or film on contacts to start a new carbonaceous build-up. They are economical and flexible, with enough stiffness to apply the right pressure to the contact face offering minimum wear on costly contacts. Insulated plastic handles eliminate possible shocks or shorts when working on live contacts. These burnishers have been proven successful by leading manufacturers as the only tool to use in cleaning contacts for longer life and fewer service complaints.

3-316

3-316 Overall length is 3" (7.62 cm) in balance with a 2" (5.00 cm) long blade. 3/16" (4.76 mm) width by .007" (178 mm) thickness lets you get into cramped places. For peak performance, each tool is in a vinyl case for protection from grease and moisture. Standard package contains 50 contact burnishing tools.

3-316S-10 Sample trial package of 10.



N-318



N-318 Heavy duty type with 33% greater contact burnishing area. Blade is 1/4" (6.00 mm) wide, .010" (.255 mm) thick and 3 1/4" (8.25 cm) long. Standard package contains 50.

N-318S-10 Sample trial package of 10.



CB-5



Pen Type With Replaceable Blades

Handy and practical, with pocket clip and magazine of extra blades. Blades fit into chuck at end of barrel. Practically any degree of blade rigidity is possible by varying depth of blade in chuck. Reservoir for extra blades at other end. Black plastic barrel and cap permits working on live contacts. 4 1/4" (10.8 cm) long x 3/8" (9.5 mm) diameter overall. Blades are 11/64" (4.36 mm) wide x 1 1/2" (3.8 cm) long.

CB-5 Contact Burnisher with 6 (No.266B) .007" (.178mm) thick blades. (Included in the TK-18 Tool Kit.
CB-54 Same as CB-5 except has 6 (No. 466B) .0035" (.089 mm) thick blades.
CB-6 Same as CB-54 except also contains 6 (No. 266C) round ended abrasive rods.
CB-7 Same as CB-5 except has 6 (No. 566B) smooth satin finished blades.
266B Package of 100 .007" (.178 mm) blades.
266BM-25 Minimum package 25-- .007" (.178 mm) blades.
266C Abrasive rods for cleaning contacts. 1 1/4" (3.17 cm) long x .022" (.559 mm) diameter with mildly abrasive ends. Fits CB-5 or CB-54. Minimum package 50 rods.